The working principle of the tape coating machine is to place the wound object in the center of the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object realizes the peripheral stretch film machine. At the same time, the elevator motor is also started to drive the entire assembly of the winding and strapping machine to move up and down to achieve the winding in the height direction of the object, which realizes the winding and packaging of the entire appearance of the object.
The coating of base paper by tape coater can be divided into single-sided coating and double-sided coating. Single-sided coating is to coat only one side of the base paper, such as single-sided coated paper; double-sided coating is to coat both sides of the base paper, such as double-sided coated paper
paper. Whether it is single-sided coated paper or double-sided coated paper, it can be divided into single-layer coating (primary coating) and double-layer coating (secondary coating). Double-layer coating is mostly used to produce higher quality requirements. , Coating printing with larger coating volume
paper. Double-layer coated paper has better printability than single-layer coated paper, and is an effective way to improve the quality of coated paper.
The working process of the tape coating machine: Coat the rolled substrates, such as paper, cloth, leather, aluminum foil, plastic film, etc., with a layer of glue, paint or ink with specific functions, and then wind it after drying.
For the tape machine manufacturer, the main part of the tape machine is composed of a temperature control part, a correction part, a printing part, a drying part, a slitting function, a speed control part and a temperature control part.
a. The speed control part adopts advanced stepless variable speed motor, which can continuously adjust the working speed.
b. The temperature control part adopts advanced electronic temperature control, and the automatic adjustment of temperature level is truly automated.
c. The correction part adopts foreign advanced technology, and it is equipped with a high-sensitivity automatic correction instrument and an infrared high-sensitivity probe to ensure that the corners of the products produced by this machine are neat and no waste.
d. The printing part comes with two-color gravure cylinder printing, and the printing width is the same as the width of the coated substrate.
e. The drying part adopts the latest electric steam heating. The segmented temperature control hot air circulation is evenly heated, the temperature is displayed by the LCD digital display, and the electric power of the host is only 1.1 kilowatts. The heating power is determined according to the size of the equipment.
f. The slitting function comes with a slitting function without the need for an additional slitting machine. The slitting width can be adjusted arbitrarily, the tension control, the slitting length, the automatic counting of arbitrary lengths, and the automatic shutdown have truly achieved the flow of automatic production.